{"title":"Reels","description":"Our range of Reels","products":[{"product_id":"snapper-combo","title":"Snapper Combo","description":"\u003cdiv\u003eRod:\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eLength: seven feet\u003c\/li\u003e\n\u003cli\u003eType: spin, two piece, can be mailed meaning delivery not expensive\u003c\/li\u003e\n\u003cli\u003eConstruction: graphite\u003c\/li\u003e\n\u003cli\u003eRating: 6 - 12 kilo line, 5\/8 to 1.5 ounce jig heads\u003c\/li\u003e\n\u003cli\u003eWeight: 200 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/downriggershop.com\/pages\/how-to-catch-snapper-soft-plastics\"\u003eMatch the combo to your snapper rig\u003c\/a\u003e\u003c\/strong\u003e: Read the snapper soft-plastics guide for casting, drift and weight choices. This rod's listed 5\/8 to 1 1\/2 oz jighead rating suits the heavier end; use a lighter casting outfit for small heads.\u003c\/p\u003e\n\n\u003cp\u003eReel:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRyobi 4000 spinning reel\u003c\/li\u003e\n\u003cli\u003eWeight: 320 grams\u003c\/li\u003e\n\u003cli\u003eGear ratio: 5:1\u003c\/li\u003e\n\u003cli\u003eBearings: 7\u003c\/li\u003e\n\u003cli\u003eLine capacity: 170 meters 15 kilo colour change braid (supplied pre spooled)\u003c\/li\u003e\n\u003cli\u003eDrag: 5.5 kilos\u003c\/li\u003e\n\u003cli\u003eKnob: Polished aluminium power knob\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eOur new snapper combo. I started testing it in April 2014, mainly popping dolphin fish out at the FADS and casting SPs behind when a kingfish hooked up on the downrigger, close in under the cliffs:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg alt=\"Andy using the Snapper Combo at Bonito Alley\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/andy_using_downrigger_shop_snapper_combo_large.jpg?v=1540078756\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003eEven though nothing big encountered, it was casting poppers out of sight. And distance is really important when you’re casting unweighted live baits or soft plastics. The rod tippy, to store casting energy, but with an even not progressive taper to it, meaning the full length acts as a shock absorber on a good one. A light matching size reel gives the combo a nice balance:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg alt=\"Two Snapper Combos ready to be shipperd\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/two_fresh_snapper_combos_large.jpg?v=1540078756\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003eI took it up to the footy field for some distance testing, to find out exactly what it was capable of:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg alt=\"Testing the Downrigger Shop's Snapper Combo casting range\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/testing_snapper_combo_cast_range_large.jpg?v=1540078755\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003eResults, best out of three casts:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e9 inch unweighted soft plastic lure = 41 metres\u003c\/li\u003e\n\u003cli\u003e40 gram micro jig= 64 metres.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOver the moon about that because it proved the concept works. The idea with this combo is light weight and long distance casting but with grunt in reserve- in case you hook a big red. Designed for casting poppers to kingfish, SPs and pilchards to snapper, unweighted live baits for dollies, metals for salmon, all as far as possible. Responsive tip, so light bites can be detected. Specifications on the rod:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: seven feet\u003c\/li\u003e\n\u003cli\u003eType: spin, two piece, can be mailed meaning delivery not expensive\u003c\/li\u003e\n\u003cli\u003eConstruction: graphite\u003c\/li\u003e\n\u003cli\u003eRating: 6 - 12 kilo line, 5\/8 to 1.5 ounce jig heads\u003c\/li\u003e\n\u003cli\u003eWeight: 200 grams\u003c\/li\u003e\n\u003cli\u003ePrice: $80\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAnd the reel:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg alt=\"Two of the Snapper Combo's reels, spooled and ready to go\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/snapper_combo_reels_large.jpg?v=1540078754\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003eModel: Ryobi 4000 spinning reel\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 320 grams\u003c\/li\u003e\n\u003cli\u003eGear ratio: 5:1\u003c\/li\u003e\n\u003cli\u003eBearings: 7\u003c\/li\u003e\n\u003cli\u003eLine capacity: 170 meters 15 kilo colour change braid (supplied pre spooled)\u003c\/li\u003e\n\u003cli\u003eDrag: 5.5 kilos\u003c\/li\u003e\n\u003cli\u003eKnob: Polished aluminium power knob\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg alt=\"Snapper Combo out in action about to catch great fish\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/snapper_combo_colour_change_braid_large.jpg?v=1540078754\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003eSo $275 for the combo including rod, reel, colour change braid and fluorocarbon.\u003c\/p\u003e\n\u003cp\u003eRoss posted a positive review on the \u003ca href=\"https:\/\/www.facebook.com\/downrigger\/\" title=\"The Downrigger Shop Facebook page\"\u003eFacebook\u003c\/a\u003e page:\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\"I have one of these reels I've had it for 18 months and I have tried to kill it but it seems indestructible. They are well worth the money it feels a lot smoother than my Daiwa Saltist. Mine has landed a 17kg kingfish jigging off Allmark last winter and did it with ease. For anyone who hasn't got one of these reels you should add one to your collection. You won't be disappointed. Tight lines\"\u003c\/em\u003e\u003c\/p\u003e","brand":"Downriggershop","offers":[{"title":"Sydney, Brisbane, Melbourne","offer_id":40104232747057,"sku":"","price":295.0,"currency_code":"AUD","in_stock":false},{"title":"Elsewhere","offer_id":40104232779825,"sku":"","price":335.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/products\/downriggershop_snapper_combo_1.jpg?v=1513549449"},{"product_id":"ryobi-warrior-8000-jigging-combo","title":"Ryobi Warrior 8000 Jigging combo","description":"\u003cp\u003eReel:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRyobi Warrior 8000\u003c\/li\u003e\n\u003cli\u003eGear ratio 5:1\u003c\/li\u003e\n\u003cli\u003eDrag 8.0 kilos\u003c\/li\u003e\n\u003cli\u003eBall bearings 7\u003c\/li\u003e\n\u003cli\u003eWeight 550 grams\u003c\/li\u003e\n\u003cli\u003eSupplied prespooled with 190m 50-pound colour change braid\u003c\/li\u003e\n\u003cli\u003ePolished aluminium colour matched reel knob\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRod:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHercules 24 kilo 2-piece jig stick\u003c\/li\u003e\n\u003cli\u003eLength 5.5 feet\u003c\/li\u003e\n\u003cli\u003eWeight 270 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eThe biggest development for us this year has been the discovery of Ryobi reels. Light, powerful, reliable and well priced, they check every box on an ‘ideal jigging reel’ list:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg alt=\"The 24 kilo jigging combo in use with our downrigger\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/24_kilo_jig_combo_with_downrigger_large.jpg?v=1542674396\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003eI fished with mine all through winter 2015, and was super pleased with results and performance, even though I didn’t catch any monsters:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg alt=\"Jigging Kingfish with 100 gram jigs on the 24kg combo\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/ryobi_8000_100_gram_jig_kingfish_large.jpg?v=1542674397\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003eWe imported a few trial shipments after proving the reels’ quality and it wasn’t long before clients were sending positive pics and reports. Here’s Scott Phillips:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg alt=\"Scott Phillips catching great fish on the Ryobi jig combo\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/scott_phillips_jigging_ryobi_large.jpg?v=1542674397\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAnd here’s a beauty from Rompin:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg alt=\"Marlin caught on the Ryobi warrior 8000 combo\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/marlin_on_the_ryobi_jig_combo_large.jpg?v=1542674396\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003eHere’s specifications:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eReel:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRyobi Warrior 8000\u003c\/li\u003e\n\u003cli\u003eGear ratio 5:1\u003c\/li\u003e\n\u003cli\u003eDrag 8.0 kilos\u003c\/li\u003e\n\u003cli\u003eBall bearings 7\u003c\/li\u003e\n\u003cli\u003eWeight 550 grams\u003c\/li\u003e\n\u003cli\u003eSupplied prespooled with 190m 50-pound colour change braid\u003c\/li\u003e\n\u003cli\u003ePolished aluminium colour matched reel knob\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe drag is so smooth under 8 kilos of load – the same drag setting we use for marlin, on 24 kilo line.\u003c\/p\u003e\n\u003cp\u003eOne thing to mention? Ryobi is one of those companies continually upgrading their reels and improving performance each time. The current model we supply not only looks great, it’s great to use:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg alt=\"Ryobi Warrior 8000 reel from the bottom\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/ryobi_warrior_8000_reel_large.jpg?v=1542674397\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003eI reckon the reel looks great:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg alt=\"The Ryobi from the top of the reel\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/top_of_24kg_combo_reel_large.jpg?v=1542674398\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMatching rod is our Hercules 24 kilo 2-piece jig stick. A proven performer:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg alt=\"Jeremy jigging 12 mile reef with the hercules rod\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/jeremy_jigging_12_mile_reef_large.jpg?v=1542674396\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003eHere’s our best kingfish on it this year, a 114cm model for Darryl from Sydney’s South Head in November 2015:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg alt=\"A huge Kingfish caught jigging with the 24 kilo jigging combo off Vaucluse\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/kingfish_caught_jigging_off_vaucluse_large.jpg?v=1542674396\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003eAnother fantastic development is Roger P catching a marlin on our $125 Hercules jigging rod.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg alt=\"Roger P catching Marlin on the Hercules rod\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/catching_marlin_on_hercules_rod_large.jpg?v=1542674397\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThat Hercules rod i got some years back was finally put to a bit of a test, well for me anyway. Just been up to Brissy to fish with a few mates. They had 24kg tiagra outfits set up. I decided to put my saltiga z30 jig reel on the rod and send a lure out as shotgun. Lo n behold a small 35kg black marlin got tagged n released. Cos of the head injury it got from second hook it was tagged swum n set free without getting out of water shot\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eRod length is 5.5 feet. I like a short rod with a slow action, where the shock of the strike and fight is absorbed by the whole length of the rod. You should be able to feel the foregrip flexing on a good one. At the end of the day the rod is designed to absorb shock, some models and brands seem to have forgotten that. Being a two piece it can be posted so delivery not expensive:\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cimg alt=\"The Hercules rod in two pieces, means cheaper shipping\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/hercules_rod_in_pieces_large.jpg?v=1542674396\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp class=\"DRShop-paragraph shared_content\" data-content-guid=\"u95681-120_60_content\"\u003e\u003cspan mce-data-marked=\"1\"\u003e\u003ca href=\"https:\/\/downriggershop.com\/pages\/contact-us\" title=\"Contact the Downrigger Shop here\"\u003eSend an email or phone\u003c\/a\u003e \u003c\/span\u003efor further information and thanks for reading,\u003c\/p\u003e\n\u003cp class=\"DRShop-paragraph shared_content\" data-content-guid=\"u95681-120_61_content\"\u003eAndrew\u003c\/p\u003e","brand":"Downriggershop","offers":[{"title":"Reel and rod combo","offer_id":7422613192753,"sku":"","price":315.0,"currency_code":"AUD","in_stock":false},{"title":"Reel","offer_id":7422627315761,"sku":"","price":180.0,"currency_code":"AUD","in_stock":false},{"title":"Rod","offer_id":7422627348529,"sku":"","price":150.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/products\/Ryobi_Warrior_8000.jpg?v=1523924212"},{"product_id":"detachable-line-counter","title":"Detachable Fishing Line Counter","description":"\u003cspan id=\"line-counter-buy\"\u003e\u003c\/span\u003e\n\u003cp\u003e\u003cstrong\u003eAdd a metre counter to your existing fishing rod or downrigger without buying a dedicated line-counter reel.\u003c\/strong\u003e This compact clip-on fishing line counter measures line movement in one-metre increments and resets to 000 at the push of a button.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e large 3-digit mechanical counter, 000 to 999 m\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMeasurement:\u003c\/strong\u003e one-metre increments\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuick reset:\u003c\/strong\u003e push-button return to 000\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e padded jaws with stainless clip for quick attachment to a fishing rod or suitable downrigger boom\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUseful for:\u003c\/strong\u003e deep dropping, jigging, livebaiting, electric-reel fishing, downrigging and measuring line while spooling a reel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e approximately 65 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eEffectively a 1000 m line counter:\u003c\/strong\u003e the display itself is three digits and reads from 000 to 999 m. We describe it accurately as a 999 m display, while also referring to it as a 1000 m-class line counter because that is how anglers commonly search for this depth range.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDelivery included in Australia.\u003c\/strong\u003e Choose a single counter or two-pack above.\u003c\/p\u003e\n\n\u003c!-- split --\u003e\n\n\u003cdiv style=\"max-width: 980px; margin: 0 auto;\"\u003e\n  \u003ch2\u003eClip-On Fishing Line Counter for Depth and Reel Spooling\u003c\/h2\u003e\n\n  \u003cp\u003eA line counter is a simple tool, but it solves several different problems. It can tell you how much line has passed from a reel, help you repeat a productive drop, let you compare line out with the depth shown on your sounder, or measure how much line you actually put onto a reel during spooling.\u003c\/p\u003e\n\n  \u003cp\u003eThis detachable model clips onto the rod rather than being built into the reel. That means you can move it between compatible rods, use it with spinning or overhead tackle, attach it to a suitable downrigger boom, and remove it when you no longer need it.\u003c\/p\u003e\n\n  \u003cdiv style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(220px, 1fr)); gap: 16px; margin: 28px 0;\"\u003e\n    \u003cdiv style=\"border: 1px solid #e2e2e2; padding: 20px; border-radius: 4px;\"\u003e\n      \u003ch3 style=\"margin-top: 0;\"\u003eFish a Known Depth\u003c\/h3\u003e\n      \u003cp style=\"margin-bottom: 0;\"\u003eUse the counter with your sounder when deep dropping, jigging or presenting a bait at a repeatable amount of line out.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"border: 1px solid #e2e2e2; padding: 20px; border-radius: 4px;\"\u003e\n      \u003ch3 style=\"margin-top: 0;\"\u003eMeasure Line While Spooling\u003c\/h3\u003e\n      \u003cp style=\"margin-bottom: 0;\"\u003eClip it to the rod and measure the line passing through as you fill a reel instead of relying only on the capacity printed on the reel or spool.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"border: 1px solid #e2e2e2; padding: 20px; border-radius: 4px;\"\u003e\n      \u003ch3 style=\"margin-top: 0;\"\u003eUse Your Existing Reel\u003c\/h3\u003e\n      \u003cp style=\"margin-bottom: 0;\"\u003eAdd line-counting capability to suitable spinning, overhead and electric-reel setups without needing a dedicated line-counter reel.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eFishing Line Counter Specifications\u003c\/h2\u003e\n\n  \u003cdiv style=\"overflow-x: auto; margin: 18px 0 28px;\"\u003e\n    \u003ctable style=\"width: 100%; border-collapse: collapse; min-width: 480px;\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"row\" style=\"text-align: left; padding: 12px; border-bottom: 1px solid #ddd; width: 34%;\"\u003eProduct\u003c\/th\u003e\n          \u003ctd style=\"padding: 12px; border-bottom: 1px solid #ddd;\"\u003eDetachable fishing line counter\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"row\" style=\"text-align: left; padding: 12px; border-bottom: 1px solid #ddd;\"\u003eDisplay\u003c\/th\u003e\n          \u003ctd style=\"padding: 12px; border-bottom: 1px solid #ddd;\"\u003eLarge 3-digit mechanical display\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"row\" style=\"text-align: left; padding: 12px; border-bottom: 1px solid #ddd;\"\u003eDisplayed range\u003c\/th\u003e\n          \u003ctd style=\"padding: 12px; border-bottom: 1px solid #ddd;\"\u003e000 to 999 metres\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"row\" style=\"text-align: left; padding: 12px; border-bottom: 1px solid #ddd;\"\u003eIncrement\u003c\/th\u003e\n          \u003ctd style=\"padding: 12px; border-bottom: 1px solid #ddd;\"\u003e1 metre\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"row\" style=\"text-align: left; padding: 12px; border-bottom: 1px solid #ddd;\"\u003eReset\u003c\/th\u003e\n          \u003ctd style=\"padding: 12px; border-bottom: 1px solid #ddd;\"\u003ePush-button reset to 000\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"row\" style=\"text-align: left; padding: 12px; border-bottom: 1px solid #ddd;\"\u003eAttachment\u003c\/th\u003e\n          \u003ctd style=\"padding: 12px; border-bottom: 1px solid #ddd;\"\u003eClip-on padded jaws with stainless clip\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"row\" style=\"text-align: left; padding: 12px; border-bottom: 1px solid #ddd;\"\u003eApproximate weight\u003c\/th\u003e\n          \u003ctd style=\"padding: 12px; border-bottom: 1px solid #ddd;\"\u003e65 g\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003cth scope=\"row\" style=\"text-align: left; padding: 12px; border-bottom: 1px solid #ddd;\"\u003eApplications\u003c\/th\u003e\n          \u003ctd style=\"padding: 12px; border-bottom: 1px solid #ddd;\"\u003eDeep dropping, jigging, livebaiting, electric-reel fishing, downrigging and measuring line while spooling\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eHow to Use the Clip-On Line Counter\u003c\/h2\u003e\n\n  \u003col\u003e\n    \u003cli\u003e\n\u003cstrong\u003eClip the counter to the rod.\u003c\/strong\u003e Choose a position where the line can pass smoothly through the counter and across the measuring wheel. Under heavier load, position it so the line approaches and leaves the counter evenly rather than pulling sharply sideways.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWrap the line once around the orange measuring wheel.\u003c\/strong\u003e The line should run clockwise around the wheel as described in our original instructions.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePress the orange reset button.\u003c\/strong\u003e Start from 000 before the drop or before you begin spooling.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLet line move through the counter.\u003c\/strong\u003e The wheel turns as the line passes and the display records the amount in one-metre steps.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUse the number as your repeatable line-out reference.\u003c\/strong\u003e Reset again whenever you want to begin a new measurement.\u003c\/li\u003e\n  \u003c\/ol\u003e\n\n  \u003cdiv style=\"position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 800px; margin: 28px auto;\"\u003e\n    \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/KD_bwy3eNUM\" title=\"How to use a detachable fishing line counter\" style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; border: 0;\" loading=\"lazy\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eUse a Line Counter With Your Fish Finder or Sounder\u003c\/h2\u003e\n\n  \u003cp\u003eOne of the most useful applications is fishing around structure or fish that you can see on the sounder. If fish are marking at a particular depth, the counter gives you a repeatable reference for how much line you have let out.\u003c\/p\u003e\n\n  \u003cp\u003eWe used this approach at the Birchgrove Park wreck off Sydney, in around 80 m of water. With old structure still standing above the wreck, stopping a jig short of the bottom helped us work the target area without simply dropping all the way into the snags.\u003c\/p\u003e\n\n  \u003cfigure style=\"margin: 1.8em auto; text-align: center;\"\u003e\n    \u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/mirror_your_sounder_depth_with_line_counter_large.jpg?v=1539660700\" alt=\"Fish marks on a sounder used with a clip-on fishing line counter to repeat the amount of line out\" loading=\"lazy\" style=\"display: block; width: 100%; max-width: 800px; height: auto; margin: 0 auto;\"\u003e\n    \u003cfigcaption style=\"font-size: 0.92em; color: #666; margin-top: 8px;\"\u003eA sounder gives you the target depth. The line counter gives you a repeatable measure of how much line has passed from the reel.\u003c\/figcaption\u003e\n  \u003c\/figure\u003e\n\n  \u003cdiv style=\"background: #f6f6f6; border-left: 4px solid #333; padding: 20px 22px; margin: 28px 0;\"\u003e\n    \u003ch3 style=\"margin-top: 0;\"\u003eLine out is not always the same as vertical depth\u003c\/h3\u003e\n    \u003cp style=\"margin-bottom: 0;\"\u003eThe counter measures line passing over its wheel. Current, boat movement, sinker or jig weight and line angle can all make the actual vertical depth of your terminal tackle different from the amount of line shown. Use your sounder and the counter together, especially in deep water or strong current.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003ch2\u003eMeasure How Much Line Is Really on Your Reel\u003c\/h2\u003e\n\n  \u003cp\u003eReel-capacity figures are useful guides, but the amount you actually fit can change with braid diameter, backing, spool fill level and spooling tension. A detachable line counter lets you measure the line that physically passes onto the reel.\u003c\/p\u003e\n\n  \u003cp\u003eThis is particularly handy when dividing a bulk spool between reels, checking how much braid you have loaded, or replacing line on a reel where you want a known amount. Because the counter clips to the rod, you can use it with an existing spinning reel or overhead setup instead of buying a reel with a built-in counter purely for this job.\u003c\/p\u003e\n\n  \u003ch2\u003eProven in 400 m Plus Deep-Drop Fishing\u003c\/h2\u003e\n\n  \u003cp\u003eWe have used these counters well beyond normal inshore depths. At Browns Mountain off Sydney, they were used while fishing in more than 400 m of water, including readings around 415 m. We have also clipped one onto a rod when the display on an electric reel was playing up.\u003c\/p\u003e\n\n  \u003cp\u003eThat real-world use is why we are comfortable describing this as a 1000 m-class fishing line counter while still being precise about the hardware: the mechanical display itself has three digits and reads from 000 to 999 m.\u003c\/p\u003e\n\n  \u003cp\u003eFor the full story, including deep dropping, electric reels, homemade downriggers and jigging against sounder marks, see our practical guide:\u003c\/p\u003e\n\n  \u003cp style=\"text-align: center; margin: 1.8em 0;\"\u003e\u003ca href=\"\/fr\/blogs\/tackle-news\/count-down\" class=\"action_button\"\u003eHow to Use a Fishing Line Counter\u003c\/a\u003e\u003c\/p\u003e\n\n  \u003ch2\u003eFishing Line Counter FAQs\u003c\/h2\u003e\n\n  \u003ch3\u003eDoes this line counter measure to 1000 metres?\u003c\/h3\u003e\n  \u003cp\u003eThe counter has a three-digit display reading from 000 to 999 m in one-metre increments. In practical product and search terms it sits in the 1000 m line-counter class, but 999 m is the maximum number the three-digit display can show at one time.\u003c\/p\u003e\n\n  \u003ch3\u003eCan I use it with a spinning reel?\u003c\/h3\u003e\n  \u003cp\u003eYes, the counter attaches to the rod rather than being built into the reel, so it can be used with suitable spinning-reel setups. Mount it where the line can run cleanly through the counter without being pulled sharply sideways.\u003c\/p\u003e\n\n  \u003ch3\u003eCan I use it with an electric reel?\u003c\/h3\u003e\n  \u003cp\u003eYes. We have used a detachable counter with electric-reel fishing, including as a practical backup when an electric reel display was not behaving as expected. Do not assume two different measuring systems will always show exactly the same number.\u003c\/p\u003e\n\n  \u003ch3\u003eCan it be used on a downrigger?\u003c\/h3\u003e\n  \u003cp\u003eYes, it can be clipped to a suitable downrigger boom. We have supplied this type of detachable counter with our downriggers for years. Position it so the line runs cleanly over the measuring wheel.\u003c\/p\u003e\n\n  \u003ch3\u003eIs the counter showing the exact depth of my bait or jig?\u003c\/h3\u003e\n  \u003cp\u003eIt is measuring the amount of line that passes through the counter. In still water with a near-vertical line that may be close to depth, but current, drift and line angle can create a difference. For target-depth fishing, use the counter together with your sounder.\u003c\/p\u003e\n\n  \u003ch3\u003eCan I use it to measure line while spooling a reel?\u003c\/h3\u003e\n  \u003cp\u003eYes. This is one of our favourite uses for it. Reset the counter to 000 and measure the line as it passes onto the reel. It is a practical way to check actual line loaded rather than relying only on the nominal capacity printed on the reel.\u003c\/p\u003e\n\n  \u003cdiv style=\"text-align: center; margin: 34px 0 10px; padding: 28px 22px; background: #f6f6f6;\"\u003e\n    \u003ch2 style=\"margin-top: 0;\"\u003eAdd a Counter to the Tackle You Already Own\u003c\/h2\u003e\n    \u003cp\u003eChoose a single detachable fishing line counter or a two-pack above. Australian delivery is included.\u003c\/p\u003e\n    \u003cp style=\"margin-bottom: 0;\"\u003e\u003ca href=\"#line-counter-buy\" class=\"action_button\"\u003eChoose 1 or 2 Line Counters\u003c\/a\u003e\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Downriggershop","offers":[{"title":"1 Line counter","offer_id":7443839320113,"sku":"","price":22.0,"currency_code":"AUD","in_stock":true},{"title":"2 Line counters","offer_id":7443839385649,"sku":"","price":33.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/detachable-fishing-line-counter-main-2048.png?v=1787877668"},{"product_id":"carbontex-drag-washers","title":"Feuille Carbontex à découper","description":"\u003cp id=\"carbontex-buy\"\u003eUne feuille de \u003cstrong\u003e100 × 195 mm\u003c\/strong\u003e pour découper vos rondelles de frein. Choisissez \u003cstrong\u003e0,5 ou 1,0 mm\u003c\/strong\u003e selon vos pièces d’origine. Feuille non découpée, sans âme en fibre de verre.\u003c\/p\u003e\n\u003cp class=\"dr-carbontex-delivery-short\"\u003eEnvoi ordinaire sans suivi inclus, selon destination. Option avec suivi facturée séparément.\u003c\/p\u003e\n\u003cnav class=\"dr-carbontex-anchors\" aria-label=\"Sur cette page\"\u003e\u003ca href=\"#carbontex-mesurer\"\u003eÉpaisseur\u003c\/a\u003e\u003ca href=\"#carbontex-montage\"\u003eMontage\u003c\/a\u003e\u003ca href=\"#carbontex-livraison\"\u003eLivraison\u003c\/a\u003e\u003ca href=\"#carbontex-atelier\"\u003eAteliers\u003c\/a\u003e\u003c\/nav\u003e\n\u003c!-- split --\u003e\n\u003cdiv class=\"dr-carbontex-fr\"\u003e\n\u003csection id=\"carbontex-mesurer\"\u003e\u003ch2\u003eChoisir la bonne épaisseur\u003c\/h2\u003e\u003cp\u003eLa feuille convient à la fabrication de rondelles de friction aux dimensions de votre moulinet, notamment pour entretenir plusieurs moulinets ou un ancien modèle. Ce n’est pas un kit propre à une marque.\u003c\/p\u003e\u003col\u003e\u003cli\u003e\u003cstrong\u003eMesurez une rondelle d’origine :\u003c\/strong\u003e diamètre intérieur, diamètre extérieur et épaisseur, idéalement au pied à coulisse.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRespectez la hauteur totale de l’empilage.\u003c\/strong\u003e Choisissez une épaisseur compatible avec le montage d’origine. Plus épais ne signifie pas meilleur ; le type de moulinet ne suffit pas à choisir.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eVérifiez l’éclaté de votre modèle.\u003c\/strong\u003e Ne forcez pas le circlip pour faire rentrer des rondelles trop épaisses. En cas de doute, indiquez-nous le modèle exact et vos mesures avant de commander.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003e\u003ca href=\"https:\/\/downriggershop.com\/pages\/contact-us\" hreflang=\"en\"\u003eNous contacter — page de contact en anglais\u003c\/a\u003e.\u003c\/p\u003e\n\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/carbontex_drag_washer_new_old_comparison_large.jpg?v=1539737123\" width=\"409\" height=\"480\" alt=\"Rondelle d’origine brune au-dessus d’une rondelle Carbontex noire découpée\" loading=\"lazy\" decoding=\"async\"\u003e\u003cfigcaption\u003eLa rondelle d’origine sert de référence pour les diamètres et l’épaisseur. La rondelle noire en dessous est une pièce de remplacement découpée dans la feuille.\u003c\/figcaption\u003e\u003c\/figure\u003e\n\u003c\/section\u003e\n\u003csection id=\"carbontex-matiere\"\u003e\u003ch2\u003eDu Carbontex dans toute l’épaisseur\u003c\/h2\u003e\u003cp\u003eNos feuilles de 0,5 et 1,0 mm sont noires dans toute leur épaisseur, sans âme en fibre de verre.\u003c\/p\u003e\n\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/cheap_vs_real_carbontex_comparison_large.jpg?v=1539737123\" width=\"480\" height=\"239\" alt=\"Notre Carbontex en bas ; matériau sandwich à âme en fibre de verre d’un autre fournisseur au-dessus\" loading=\"lazy\" decoding=\"async\"\u003e\u003cfigcaption\u003eNotre Carbontex est présenté en dessous du matériau sandwich de qualité inférieure à âme en fibre de verre vendu par d’autres fournisseurs. Ce matériau sandwich provient d’un autre fournisseur et n’est pas vendu par Downriggershop.\u003c\/figcaption\u003e\u003c\/figure\u003e\n\u003c\/section\u003e\n\u003csection id=\"carbontex-montage\"\u003e\u003ch2\u003eDécouper et monter vos rondelles\u003c\/h2\u003e\u003cp\u003ePréparez un plan de travail propre, un pied à coulisse, des ciseaux bien affûtés adaptés au matériau, un emporte-pièce creux au bon diamètre ou un foret adapté, et la notice de votre moulinet. Les photos montrent des exemples : l’ordre et le nombre de pièces dépendent de votre modèle.\u003c\/p\u003e\n\u003cdiv class=\"dr-carbontex-step\"\u003e\u003cdiv\u003e\u003ch3\u003e1. Photographier et garder l’ordre\u003c\/h3\u003e\u003cp\u003eDesserrez le frein et accédez à l’empilage comme indiqué dans la notice. Sur le moulinet spinning illustré, il se trouve dans la bobine. Retenez le circlip lors de sa dépose pour éviter qu’il saute. Photographiez chaque étape, puis alignez les pièces dans leur ordre et leur sens de montage, y compris les rondelles métalliques et leurs ergots.\u003c\/p\u003e\u003c\/div\u003e\n\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/drag_washer_assembly_downrigger_shop_large.jpg?v=1539996252\" width=\"480\" height=\"257\" alt=\"Bobine, circlip et rondelles du frein alignés dans leur ordre\" loading=\"lazy\" decoding=\"async\"\u003e\u003cfigcaption\u003eGardez une trace de l’ordre et du sens de chaque pièce. Cet empilage est un exemple, pas un montage universel.\u003c\/figcaption\u003e\u003c\/figure\u003e\n\u003c\/div\u003e\u003cdiv class=\"dr-carbontex-step\"\u003e\u003cdiv\u003e\u003ch3\u003e2. Reporter le gabarit\u003c\/h3\u003e\u003cp\u003eUtilisez la rondelle de friction d’origine comme gabarit. Maintenez-la sur la feuille sans la déformer, puis reportez les diamètres intérieur et extérieur. Disposez vos découpes sur les 100 × 195 mm avant de commencer pour limiter les chutes.\u003c\/p\u003e\u003c\/div\u003e\n\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/getting_ready_to_cut_carbontex_to_size_large.jpg?v=1539737123\" width=\"480\" height=\"319\" alt=\"Rondelle d’origine maintenue sur une feuille Carbontex par une pince\" loading=\"lazy\" decoding=\"async\"\u003e\u003cfigcaption\u003eLa pince maintient le gabarit en place pendant le repérage.\u003c\/figcaption\u003e\u003c\/figure\u003e\n\u003c\/div\u003e\u003cdiv class=\"dr-carbontex-step\"\u003e\u003cdiv\u003e\u003ch3\u003e3. Faire le trou, puis découper le contour\u003c\/h3\u003e\u003cp\u003eRéalisez le trou central avec un emporte-pièce creux adapté ou un foret du bon diamètre, sur un support stable. La photo montre le matériel utilisé pour le perçage. Découpez ensuite le contour avec des ciseaux adaptés. Travaillez progressivement pour reproduire les dimensions de l’original.\u003c\/p\u003e\u003cp\u003ePortez une protection oculaire, évitez de respirer les poussières et fibres, puis nettoyez les chutes et le plan de travail.\u003c\/p\u003e\u003c\/div\u003e\n\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/use_a_drill_for_easy_carbontex_cutting_large.jpg?v=1539737125\" width=\"480\" height=\"435\" alt=\"Perceuse, ciseaux et deux rondelles illustrant la découpe du trou central\" loading=\"lazy\" decoding=\"async\"\u003e\u003cfigcaption\u003eLe trou central est réalisé avant la découpe finale du contour ; un emporte-pièce adapté peut remplacer le foret.\u003c\/figcaption\u003e\u003c\/figure\u003e\n\u003c\/div\u003e\u003cdiv class=\"dr-carbontex-step\"\u003e\u003cdiv\u003e\u003ch3\u003e4. Vérifier les dimensions et la propreté\u003c\/h3\u003e\u003cp\u003eComparez chaque pièce à son gabarit. Les bords et le trou doivent être nets, sans fibres libres ni débris. Vérifiez que la rondelle s’insère correctement sans se coincer. Nettoyez les pièces métalliques selon les préconisations du fabricant et faites contrôler toute pièce déformée ou endommagée.\u003c\/p\u003e\u003c\/div\u003e\n\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/pre_cut_carbontex_drag_washers_large.jpg?v=1539737125\" width=\"480\" height=\"429\" alt=\"Rondelles Carbontex de différentes tailles découpées dans une feuille\" loading=\"lazy\" decoding=\"async\"\u003e\u003cfigcaption\u003eExemples de rondelles terminées. Elles illustrent le résultat ; vous achetez une feuille non découpée.\u003c\/figcaption\u003e\u003c\/figure\u003e\n\u003c\/div\u003e\u003cdiv class=\"dr-carbontex-step\"\u003e\u003cdiv\u003e\u003ch3\u003e5. À sec ou légèrement graissé\u003c\/h3\u003e\u003cp\u003eSuivez les instructions du fabricant pour votre frein. Si un montage graissé est prévu, appliquez un film fin et régulier de graisse pour frein de moulinet compatible avec les rondelles carbone, puis essuyez l’excédent. N’utilisez pas de graisse automobile pour étriers de frein. Si le montage doit rester à sec, n’ajoutez pas de graisse.\u003c\/p\u003e\u003c\/div\u003e\n\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/greasing_new_carbontex_drag_washers_large.jpg?v=1539737123\" width=\"480\" height=\"360\" alt=\"Application au pinceau d’une fine couche de graisse sur une rondelle carbone\" loading=\"lazy\" decoding=\"async\"\u003e\u003cfigcaption\u003eGraissez seulement si le montage le prévoit, avec un produit adapté et sans excès.\u003c\/figcaption\u003e\u003c\/figure\u003e\n\u003c\/div\u003e\u003cdiv class=\"dr-carbontex-step\"\u003e\u003cdiv\u003e\u003ch3\u003e6. Remonter et essayer le frein\u003c\/h3\u003e\u003cp\u003eReplacez les pièces dans leur ordre et leur sens d’origine, puis le circlip et la bobine selon la notice. Vérifiez que tout se met en place sans forcer. Commencez avec un frein peu serré et exercez une traction régulière en position sûre ; la bobine doit démarrer et tourner sans à-coups. Vérifiez progressivement la plage de réglage avant de pêcher, dans les limites du moulinet, de la canne et de la ligne.\u003c\/p\u003e\u003cp\u003eSi le montage est inconnu, étanche, électrique ou couvert par une garantie, confiez l’intervention à un réparateur compétent plutôt que d’improviser.\u003c\/p\u003e\u003c\/div\u003e\n\u003cfigure\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/files\/installing_new_drag_washers_in_old_reel_large.jpg?v=1539737124\" width=\"480\" height=\"250\" alt=\"Bobine et rondelles métalliques et Carbontex préparées pour le remontage\" loading=\"lazy\" decoding=\"async\"\u003e\u003cfigcaption\u003eLes nouvelles rondelles sont replacées avec les pièces métalliques d’origine, dans l’ordre propre au moulinet.\u003c\/figcaption\u003e\u003c\/figure\u003e\n\u003c\/div\u003e\u003cp\u003ePour aller plus loin : \u003ca href=\"https:\/\/downriggershop.com\/blogs\/tackle-news\/upgrade-drag-washers\" hreflang=\"en\"\u003eguide illustré détaillé — en anglais\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e\n\u003csection id=\"carbontex-questions\"\u003e\u003ch2\u003eUn frein qui accroche ? Les vérifications utiles\u003c\/h2\u003e\n\u003cdetails\u003e\u003csummary\u003eLe fil sort, mais la bobine ne tourne pas\u003c\/summary\u003e\u003cp\u003eLa tresse peut glisser autour du moyeu : cela peut ressembler à un défaut de frein. Ne serrez pas davantage pour masquer le problème. Corrigez la fixation du fil et le bobinage selon la notice, puis refaites un essai.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eLa bobine tourne, mais le frein reste irrégulier\u003c\/summary\u003e\u003cp\u003eNotez s’il colle avant de lâcher, pulse ou change de résistance. Retirez seulement les saletés accessibles comme le fabricant l’autorise, sans les pousser à l’intérieur. Des rondelles usées, glacées, déformées ou cassées méritent un contrôle, mais le montage, le sel, le sable ou une autre pièce peuvent aussi être en cause. N’ajoutez pas d’huile ou de graisse pour tenter de diagnostiquer la panne. Si le défaut persiste, faites réviser le moulinet ; après immersion en mer, suivez rapidement les consignes d’entretien du fabricant.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/downriggershop.com\/pages\/why-is-my-fishing-reel-drag-sticking\" hreflang=\"en\"\u003eDiagnostic détaillé avant démontage — en anglais\u003c\/a\u003e.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eCombien de moulinets peut-on faire avec une feuille ?\u003c\/summary\u003e\u003cp\u003eCela dépend du diamètre, du nombre de rondelles par moulinet et de la disposition des découpes. Une feuille peut fournir plusieurs rondelles, voire servir à plusieurs moulinets, mais aucun nombre fixe n’est garanti. Une unité commandée correspond à une feuille de 100 × 195 mm.\u003c\/p\u003e\u003c\/details\u003e\n\u003cdetails\u003e\u003csummary\u003eEst-ce que le frein sera plus puissant ?\u003c\/summary\u003e\u003cp\u003eLe but est de remplacer des rondelles usées et de retrouver un frein régulier avec un montage correct. Cela ne renforce ni les engrenages, ni les roulements, ni le bâti du moulinet. Respectez les limites du fabricant.\u003c\/p\u003e\u003c\/details\u003e\u003c\/section\u003e\n\u003csection id=\"carbontex-livraison\"\u003e\u003ch2\u003eLivraison depuis l’Australie\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eL’envoi ordinaire sans suivi est inclus\u003c\/strong\u003e lorsque ce service est disponible pour votre destination. Pour un suivi, choisissez l’option facturée séparément au paiement. À l’international, Economy est sans suivi ; Standard est l’option avec suivi lorsqu’elle est proposée. Les services et montants définitifs s’affichent avant validation.\u003c\/p\u003e\u003cp\u003eLes articles en stock sont normalement \u003cstrong\u003eexpédiés sous 1 à 3 jours ouvrés après paiement\u003c\/strong\u003e. C’est le délai de préparation, pas le temps de transport. Les délais d’acheminement sont estimatifs ; le transport international et la douane peuvent les allonger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrais d’importation :\u003c\/strong\u003e sauf indication contraire explicite, la TVA à l’importation, les droits de douane et les frais de traitement éventuellement réclamés à destination sont à votre charge, en plus du prix payé à Downriggershop. La mention « Taxes incluses » du panier ne signifie pas que ces frais sont prépayés.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/downriggershop.com\/policies\/shipping-policy\" hreflang=\"en\"\u003ePolitique complète de livraison — en anglais\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eCommande défectueuse, incorrecte ou retardée\u003c\/h3\u003e\u003cp\u003eContactez-nous avec le numéro de commande et une description du problème ; joignez si possible des photos de l’article et de l’emballage en cas de dommage. Pour un retard anormal ou une livraison manquante, nous pourrons enquêter auprès du transporteur. Signalez rapidement toute erreur d’adresse ; une modification après expédition n’est pas garantie.\u003c\/p\u003e\u003cp\u003eContactez-nous \u003cstrong\u003eavant tout retour\u003c\/strong\u003e. Une évaluation peut être nécessaire pour déterminer la solution adaptée : réparation, remplacement, remboursement ou autre recours applicable. Les retours pour simple changement d’avis ou erreur de choix ne sont généralement pas acceptés ; vos droits au titre de l’Australian Consumer Law et les droits impératifs supplémentaires de votre pays restent préservés.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/downriggershop.com\/pages\/contact-us\" hreflang=\"en\"\u003eNous contacter — page de contact en anglais\u003c\/a\u003e.\u003cbr\u003e\u003ca href=\"https:\/\/downriggershop.com\/policies\/refund-policy\" hreflang=\"en\"\u003ePolitique complète de retours et remboursements — en anglais\u003c\/a\u003e, notamment pour les frais de retour et l’évaluation du produit.\u003c\/p\u003e\u003c\/section\u003e\n\u003csection id=\"carbontex-atelier\" class=\"dr-carbontex-workshop\"\u003e\u003ch2\u003eVous entretenez des moulinets en atelier ?\u003c\/h2\u003e\u003cp\u003ePour plusieurs feuilles, un mélange d’épaisseurs ou de grandes feuilles entières d’environ 195 × 300 mm, indiquez-nous les quantités, les formats, la répartition entre 0,5 et 1,0 mm et le pays de destination.\u003c\/p\u003e\u003cp\u003eLots atelier et grandes feuilles sont proposés \u003cstrong\u003esur demande\u003c\/strong\u003e. Le prix et la livraison sont confirmés séparément.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/downriggershop.com\/pages\/contact-us\" hreflang=\"en\"\u003eNous contacter — page de contact en anglais\u003c\/a\u003e.\u003c\/p\u003e\u003c\/section\u003e\n\u003cp class=\"dr-carbontex-end\"\u003e\u003ca href=\"#carbontex-buy\" class=\"action_button\"\u003eChoisir mon épaisseur\u003c\/a\u003e\u003c\/p\u003e\u003c\/div\u003e","brand":"Downriggershop","offers":[{"title":"1,0 mm","offer_id":13611975540785,"sku":"CARBONTEX-10MM","price":39.0,"currency_code":"AUD","in_stock":true},{"title":"0,5 mm","offer_id":13611975573553,"sku":"CARBONTEX-05MM","price":39.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1940\/1341\/products\/carbontex_sheet_dimensions.jpg?v=1542759543"}],"url":"https:\/\/downriggershop.com\/fr\/collections\/reels.oembed","provider":"Downriggershop","version":"1.0","type":"link"}